Tag Archives: colour

Estuary sunrise

sunrise over the Forth estuary

estuary sunrise

Another one from the archive, this was shot at 08:23 hrs on 08 December 2017 using my smart-phone. I really like the colours and simple composition of the open space and it was interesting to revisit the editing process so I thought I might share that and walk you through what I did with this one.

This was entirely processed in Lightroom Classic CC and typically of my work flow I started with lens corrections ticking on both:

  • Remove Chromatic Aberration, and
  • Enable Profile Corrections

Next stop in the process was the basic tab where I:

  • reduced the exposure very slightly (-0.12)
  • increased the contrast a little
  • dropped the highlights significantly (-75)
  • lightened the shadows significantly (+57)
  • moderately lightened the blacks (+31)
  • added clarity (+36)
  • increased vibrance (+26)

The next stop was the HSL tab. Given that the colours are important to this image I spent quite a time on these settings, making adjustments to each of hue, saturation and luminance. I should emphasise that the settings I am sharing are what I ended up with and the numbers are pretty much irrelevant other than to give you a sense of the relative amount of adjustment I was making. The process was very much one of observation, trial and error to get to what I felt looked good and close to what my eyes saw at the moment of taking the picture. So, to HSL.

  • Hue – I pulled back the hue settings on each of:
    • orange (-29)
    • yellow (-27)
    • purple (-22)
    • magenta (-27)
  • Saturation – I made the following adjustments:
    • red (+4)
    • orange (+20)
    • yellow (+16)
    • purple (+29)
    • magenta (+20)
  • Luminance – I made the following adjustments:
    • orange (-11)
    • yellow (+24)
    • purple (+42)
    • magenta (+27)

Finally, I sharpened using the Detail tab. I tend to go carefully here and use the masking slider to make sure I only sharpen what I want. Here’s a tip – if you hold the Alt key while adjusting the masking slider it shows you exactly what will be sharpened (only the white areas). With that in mind here are the final settings under detail:

  • amount (59)
  • radius (1)
  • detail (25)
  • masking (92)
  • luminance (36)
  • detail (50)
  • contrast (11)

And that’s it. Please note though, that interesting though this might be every image is different and when editing you need to be the one making the decisions based on how you want the final image to look. My aim in sharing the above is only to give you a sense of what I adjusted and, relatively, by how much. In working on photos I never look at the number values of the adjustments, only at the visual effect of what I’m doing,

Generally my editing is much lighter than the treatment this image got and for the most part, the accumulation of small adjustments is what makes the biggest difference.

Advertisements

I had no idea…

Well, it’s been a busy week with all manner of boring (but necessary) admin tasks to attend to and yesterday evening I realised I didn’t have a subject when I intended to write a blog post today. I decided, therefore, to take the initiative and head out with my camera and no clear idea as to what I would shoot.

Inspired by some shots my family had taken on a trip to Elie in the East Neuk of Fife, and  only a short drive from home, I set out for there to see what might be on offer photographically. As I prepared to leave, the dog was giving me “the look” which was enough to persuade me to take her along. If nothing else, the evening air would be good for both of us.

I parked up near the Fife Coastal Path and headed out towards Elie Ness Lighthouse. There was nothing really catching my attention there so I carried on round to Lady’s Tower, an old stone edifice built in 1760 apparently as a changing room for Lady Anstruther who liked to bathe in the shelter of the rocks just below. It’s said that a bell would be rung to warn the locals to stay away while she was bathing.

The evening sun was getting a little lower in the sky, casting a warm glow on the stone of the tower and the rocks below. I tried a few shots around the tower before setting up with ND filters to get some soft water effects as the sea washed over the rocks. At the time, I wasn’t all that convinced that I was getting shots I would be happy with, but opening them up in Lightroom and doing some editing got better results than I had expected. I was by that time, however, thinking that my blog post would be about a forlon trip when nothing really presented itself as a pleasing image that would be “a keeper”. And that happens – often. Just like fishermen, photographers come home with tales of the one that got away, or the one that actually never was.

I was preparing to settle for this just being a nice time out with the dog, taking some photos and enjoying the sea air on a pleasant summer evening – not a bad outcome – and was thinking about stopping by a bench to pack my camera away when I spotted this….

grasses in the sunset

sunset grasses

This is actually the last of three shots that I took of this scene. What immediately attracted me was the warm glow of the sun which was casting a more diffused light having been partially obscured by clouds. It was the beautiful golden light that was capturing my imagination.

Shot 1 – was very bog standard – wide, capturing the whole scene and very much the typical sunset type of photograph. It was my shot in the can, if you like; something to have that could probably be worked on a little in post.

Shot 2 – was cropped in a little, by zooming to a longer focal length and focused on the background. I felt that was a better composition. With landscapes, it’s easy to stay with the grand vista, but there is often great merit in homing in on a specific feature, or aspect of the scene.

Shot 3 – the one above. This time I decided to keep the same basic framing as shot 2 but this time to focus on the grasses in the foreground and throw the wider “grand vista” out of focus. I’m pleased with it as the grasses make for a good point of interest, provide a leading line and frame the highlight on the water.

All of the processing was done in Lightroom with the intention of using as light a touch as possible, which consisted of a slight warming of the colour temperature and some minimal and local highlight dampening.

For those who follow this blog, thank you so much for your interest. If you don’t already follow the blog, please consider signing up to receive email notifications when I post.

You can follow me on Instagram and find me on Facebook too.

This photograph is available to buy as a print from my website.  Sales allow me to keep doing what I do.

Be inspired and keep those shutters firing.

Making the most of it

I went to the seaside recently on what was a fairly calm but uninspiring day. I did have a definite plan, though. My aim was to shoot a minimalist seascape and see if I could make it interesting whilst lacking a major feature or subject within the frame.

This is what I ended up with.

beach sea and sky

deep blue

But it’s not how things began.

Here’s the original RAW file as it came out of the camera.

unedited seascape

seascape

I could see some potential in this, but as I’d been shooting towards the light, the colours are muted and the picture is pretty flat and lacking in contrast. I also felt that there are distractions here that would be better removed.

I liked the faint leading lines in the wet sand which are complemented by the small raised sandy patches helpfully pointing towards a vanishing point roughly mid-frame. Compositionally, I thought there was enough going on here to be interesting without a major subject. However, the small stalks of seaweed rising from the sand were a distraction was the drilling rig to the right of frame. I also wanted to remove the slight piece of lens flare to the left of frame. It was also clear that if this image was going to work, it needed to have a better colour treatment and some more contrast.

To achieve what I had in mind I was going to need me to work with both Lightroom and Photoshop. The danger I wanted to avoid was ending up with something that looked like it was on steroids – I wanted a natural look, so the job was more about recovering the image to something close to what I actually saw, whilst also getting rid of the distractions.

I started in Lightroom and, following my usual work flow, made the usual lens correction and ticked for removing chromatic aberration. After that I added a little dehaze to bring in some contrast before making a slight adjustment to the contrast setting itself. I find the dehaze feature more helpful with shots into the light. After that it was a case of reducing the highlights enough to prevent the left of frame area looking too thin and making a slight compensating adjustment to the overall exposure. That didn’t quite achieve what I wanted so I added a graduated filter running vertically and extending in from left of frame. Within that I made local adjustments (quite finely) for exposure and highlights.  I finished my work in Lightroom by adjusting the colour temperature to cool it a little and bring back some of the blue. I also slightly adjusted the saturation of blue and aqua in the HSL setting, adjusting for both hue and saturation. All of this with the lightest touch I felt I could get away with to achieve the effect I wanted.

Then it was over to Photoshop to deal with the distractions. After making a duplicate layer to work on, I removed the distractions I wanted by first using the content aware fill and then refining where necessary with a little cloning. Finally, I ran a high pass to sharpen the overall image.

In the end, I am happy with what I finally produced. I think I managed to achieve something very close to what I saw with my eyes on location. In short, I think I managed to make the most of it.