Tag Archives: dawn

Estuary sunrise

sunrise over the Forth estuary

estuary sunrise

Another one from the archive, this was shot at 08:23 hrs on 08 December 2017 using my smart-phone. I really like the colours and simple composition of the open space and it was interesting to revisit the editing process so I thought I might share that and walk you through what I did with this one.

This was entirely processed in Lightroom Classic CC and typically of my work flow I started with lens corrections ticking on both:

  • Remove Chromatic Aberration, and
  • Enable Profile Corrections

Next stop in the process was the basic tab where I:

  • reduced the exposure very slightly (-0.12)
  • increased the contrast a little
  • dropped the highlights significantly (-75)
  • lightened the shadows significantly (+57)
  • moderately lightened the blacks (+31)
  • added clarity (+36)
  • increased vibrance (+26)

The next stop was the HSL tab. Given that the colours are important to this image I spent quite a time on these settings, making adjustments to each of hue, saturation and luminance. I should emphasise that the settings I am sharing are what I ended up with and the numbers are pretty much irrelevant other than to give you a sense of the relative amount of adjustment I was making. The process was very much one of observation, trial and error to get to what I felt looked good and close to what my eyes saw at the moment of taking the picture. So, to HSL.

  • Hue – I pulled back the hue settings on each of:
    • orange (-29)
    • yellow (-27)
    • purple (-22)
    • magenta (-27)
  • Saturation – I made the following adjustments:
    • red (+4)
    • orange (+20)
    • yellow (+16)
    • purple (+29)
    • magenta (+20)
  • Luminance – I made the following adjustments:
    • orange (-11)
    • yellow (+24)
    • purple (+42)
    • magenta (+27)

Finally, I sharpened using the Detail tab. I tend to go carefully here and use the masking slider to make sure I only sharpen what I want. Here’s a tip – if you hold the Alt key while adjusting the masking slider it shows you exactly what will be sharpened (only the white areas). With that in mind here are the final settings under detail:

  • amount (59)
  • radius (1)
  • detail (25)
  • masking (92)
  • luminance (36)
  • detail (50)
  • contrast (11)

And that’s it. Please note though, that interesting though this might be every image is different and when editing you need to be the one making the decisions based on how you want the final image to look. My aim in sharing the above is only to give you a sense of what I adjusted and, relatively, by how much. In working on photos I never look at the number values of the adjustments, only at the visual effect of what I’m doing,

Generally my editing is much lighter than the treatment this image got and for the most part, the accumulation of small adjustments is what makes the biggest difference.

Advertisements